Black Horse Model Focke-Wulf FW190A, Инструкция по эксплуатации

Страница: 14 / 34

Focke-Wulf FW190A-
Item code:BH87 INSTRUCTION MANUAL.
14
INSTALLING THE STOPPER ASSEMBLY
1) The stopper has been pre-assembled
at the factory.
2) Using a modeling knife, cut one length
of silicon fuel line (the length of silicon fuel line
is calculated by how the weighted clunk should
rest about 8mm away from the rear of the tank
and move freely inside the tank). Connect one
FUEL TANK.
end of the line to the weighted clunk and the
other end to the nylon pick up tube in the stop-
per.
3) Carefully bend the second nylon tube
up at a 45 degree angle (using a cigarette
lighter). This tube will be the vent tube to the
muffler.
4) Carefully bend the third nylon tube down
at a 45 degree angle (using a cigarette lighter).
This tube will be vent tube to the fueling valve.
See pictures below:
INSTALLING THE ENGINE MOUNT.
Drill a hole
2mm diameter
C/A glue
4 x 30mm
4 x 30mm