10mm
10mm
15mm
15mm
20mm
20mm
Aileron control
Elevator control
Rudder control
PRE-FLIGHT CHECK
1)
Completely charge your transmitter and
receiver batteries before your first day of flying.
2)
Check every bolt and every glue joint in your
plane to ensure that everything is tight and well
bonded.
3)
Double check the balance of the airplane.
4)
Check the control surface.
5)
Check the receiver antenna. It should be fully
extended and not coiled up inside the fuselage.
Check the receiver antenna. It should be fully
extended and not coiled up inside the fuselage.
6)
Properly balance the propeller.
We wish you many safe and enjoyable
flights with your BUCKER BU 131
JUNGMANN
.
1)
We highly recommend setting up a plane using the
control throws listed.
2)
The control throws should be measured at the
widest point of each control surface.
3)
Check to be sure the control surfaces move in the
correct directions.
Control throw Ailerons:
Low: 10 mm up / down.
High: 15 mm up / down.
Control throw Elevators:
Low:
mm up / down.
High: 20 mm up / down.
Control throw Rudder:
Low:
mm left / right.
High: 25 mm left / right.
15
20
CONTROL THROWS
BUCKER BU 131 JUNGMANN
Item code: BH160
18
