BUCKER BU 131 JUNGMANN
Item code: BH160
8. INSTALLING HORIZONTAL STABILIZER
2)
Using a modeling knife, carefully remove the film
covering from the tail slots at the rear of the fuselage.
Make sure that you do not remove any wood from the
slots as this will affect the alignment of the tail.
1)
Elevator install as same as the way of aileron
.
3)
Draw a center line onto the horizontal stabilizer.
Then put the horizontal into the fuselage.
Top side.
Trim the covering
from the tail slots.
Secure
4 x 6mm
10
Secure
4x15mm
Fuselage
side
Bottom
