TWISTER.
INSTRUCTION MANUAL
13
4) Install the muffler and muffler extension
onto the engine and make the cutout in the
cowl for muffler clearance. Connect the fuel
and pressure lines to the carburetor, muffler
and fuel filler valve.
Install the spinner backplate, propeller and
spinner cone. The spinner cone is held in
place using two 3mm x 12mm wood screws.
INSTALLING THE SPINNER
1) Using a modeling knife, cut away the
covering from the fuselage for the stabilizer
and remove it.
2) Draw a center line onto the horizontal
stabilizer. Then slide the horizontal into the
fuselage.
Secure
Center line.
Remove covering
1. Install the rubber grommets and brass
collets into the elevator servo. Test fit the servo
into the servo tray.
2. Mount the servo to the tray using the
mounting screws provided with your radio sys-
tem.
ELEVATOR INSTALLATION.
SERVO INSTALLATION.
HORIZONTAL STABILIZER INSTALLATION.
Elevator servo
