Black Horce Model BH39, Инструкция по эксплуатации

Страница: 5 / 32

SPITFIRE.
INSTRUCTION MANUAL.
5
Top of wing.
Remove the
covering.
Flap.
Flap
servo tray.
Thread.
Aileron
servo tray
Servo
wire.

 1) Install the rubber grommets and brass
eyelets onto the aileron - flap servos.

3) Using the thread as a guide and using
masking tape, tape the servo lead to the end
of the thread: carefully pull the thread out.
When you have pulled the servo lead out,
remove the masking tape and the servo lead
from the thread.

2) Using a modeling knife, remove the cov-
ering at possition show below.

4) Drill 1,6mm pilot holes through the block
of wood for each of the four mounting screws
provided with the servo.
Remove the
covering.
Bottom of wing.