Black Horce Model BH39, Инструкция по эксплуатации

Страница: 28 / 32

SPITFIRE.
INSTRUCTION MANUAL.
28
 

3) Secure the tail wheel bracket in place
using three 3mm x 15mm wood screws. Be
careful not to overtighten the screws.
  
2) Using a pen, mark the locations of the
two mounting screws. Remove the tail wheel
bracket and drill 1mm pilot holes at the loca-
tions marked.
 

1) Set the tail wheel assembly in place
on the plywood plate. The pivot point of the
tail wheel wire should be even with the rud-
der hinge line and the tail wheel bracket should
be centered on the plywood plate.
MOUNTING THE TAIL WHEEL BRACKET.
3 x 15mm.

   1) Cut out the switch hole using a modeling
knife. Use a 2mm drill bit and drill out the two
mounting holes through the fuselage side.

 
 2) Secure the switch in place using the
two machine screws provided with the radio
system.
INSTALLING THE SWITCH.