Black Horce Model BH39, Инструкция по эксплуатации

Страница: 10 / 32

SPITFIRE.
INSTRUCTION MANUAL.
10
 4. Locate one nylon servo arm, and using
wire cutters,remove all but one of the arms.
Using a 2mm drill bit, enlarge the third hole
out from the center of the arm to accommodate
the aileron pushrod wire.
 5. Using pliers, carefully make a 90 degree
bend down at the mark made. Cut off the
excess wire, leaving about 4mm beyond the
bend.
 6. Insert the 90 degree bend down through
the hole in the servo arm. Install one nylon
snap keeper over the wire to secure it to the
arm. Install the servo arm retaining screw and
remove the masking tape from the aileron.
M2 lock nut.
M2 clevis. Snap keeper.
C/A glue.
Push.
Plastic tape.
Retractable
servo tray.
Bend and cut after.