Black + Decker YARDMASTER BCASHT80, Инструкция по эксплуатации

Страница: 11 / 44

English
9
2
Fig. E
7
Installing and Removing the Battery Pack
(Fig. F)
WARNING:
Make certain the lock-off
switch is engaged to prevent switch actuation before
removing or installing battery.
nOTE: For best results, make sure your battery pack is
fully charged.
To install battery pack:
Insert battery pack 13 into battery
housing 14 as shown in Fig. F until fully seated and an
audible click is heard.
Make sure battery pack is fully seated and fully latched
into position.
To remove battery pack: Depress the battery release
button 15 on the battery and pull battery pack out
of appliance.
Fig. F
13
15
14
OPERATION
WARNING:
To reduce the risk of
serious personal injury, turn unit off and remove
the battery pack before making any adjustments
or removing/installing attachments or
accessories.
An accidental start-up can cause injury.
WARNING:
Shock hazard. Under no
circumstances should this product be used near water.
WARNING:
Burn hazard. Moving parts
within the base unit become hot during use. Avoid
contact with moving parts within base unit when
removing and installing accessories.
WARNING
:
Always use proper eye
protection that conforms to ANSI Z87.1 (CAN/
CSA Z94.3) while operating this appliance.
CAUTION:
Wear a filter mask if the
operation is dusty. Use of gloves, long pants and
substantial footwear is recommended. Keep long
hair and loose clothing away from openings and
moving parts.
Switching On (Fig. G, H)
Always be sure of your footing and grip the tool firmly
with both hands with the thumb and fingers encircling
both handles.
Base mode
1. Push the lock off switch 5 down, squeeze the bail
handle 3 , and then the ON/OFFswitch 4 . Once the
unit is running, you may release the lock off switch. The
more the ON/OFF switch
4 is depressed, the higher the
speed of the base unit.
2. In order to keep the unit running you must continue to
squeeze bail handle and the ON/OFF switch 4 . To turn
the unit off, release either the bail handle or the ON/OFF
switch
4 .
Pole mode
1. Push the lock off switch 5 down and squeeze the ON/
OFF switch 4 . Once the unit is running, you may release
the lock off switch. The more the ON/OFF switch 4 is
depressed, the higher the speed of the base unit.
2. In order to keep the unit running you must continue
to squeeze the ON/OFF switch 4 . To turn the unit off,
release the ON/OFF switch 4 .
Fig. G
3
4
5