Black+Decker TCM700-B5, Оригинальное руководство пользователя

Страница: 4 / 20

• Do not allow children or any person unfamiliar with these
instructions to use the appliance.
• Do not allow children or animals to come near the work
area or to touch the appliance or power supply cord.
• Close supervision is necessary when the appliance is
used near children.
After use
• Switch off, remove the plug from the socket and let the
appliance cool down before leaving it unattended and
before changing, cleaning or inspecting any parts of the
appliance.
• When not in use, the appliance should be stored in a dry
place. Children should not have access to stored
appliances.
• Surfaces may be hot during use and during the cool
down period
• The element and external surfaces are subject to
residual heat after use
• Surfaces are liable to get hot during use
Inspection and repairs
• Before use, check the appliance for damaged or
defective parts. Check for breakage of parts, damage to
switches and any other conditions that may affect its
operation.
• Do not use the appliance if any part is damaged or
defective.
• Have any damaged or defective parts repaired or
replaced by an authorised repair agent.
• Before use, check the power supply cord for signs of
damage, ageing and wear.
• Do not use the appliance if the power supply cord or
mains plug is damaged or defective.
• If the power supply cord or mains plug is damaged or
defective it must be repaired by an authorised repair
agent in order to avoid a hazard. Do not cut the power
supply cord and do not attempt to repair it yourself.
• Never attempt to remove or replace any parts other than
those specified in this manual.
Electrical safety
This product must be earthed. Always check that
the mains voltage corresponds to the voltage on
the rating plate.
Appliance plugs must match the outlet. Never modify the
plug in any way.
CAUTION : In order to avoid a hazard due to inadvertent
resetting of the thermal cut-out, the appliance must not be
supplied through an external switching device, such as a
timer, or connected to a circuit that is regularly switched on
and off by the utility.
Extension cables & class 1 product
• A 3 core cable must be used as your appliance is earthed
and of class 1 construction.
• Up to 30m (100 ft) can be used without loss of power.
• If the supply cord is damaged, it must be replaced by the
manufacturer or an authorised BLACK+DECKER Service
Centre in order to avoid a hazard.
Mains plug replacement
If a new mains plug needs to be fitted:
• Safely dispose of the old plug.
• Connect the brown lead to the live terminal of the new
plug.
• Connect the blue lead to the neutral terminal.
• If the product is class I (earthed), connect the
green/yellow lead to the earth terminal.
Note : If your product is class II double insulated (only 2 wires
in the cord set), no connection is to be made to the earth
terminal.
Follow the fitting instructions supplied with good quality plugs.
Any replacement fuse must be of the same rating as the
original fuse supplied with the product.
Warning ! The above section on mains plug replacement is
for authorized service centre personals.
Additional safety instructions for coffee
makers
Warning ! Steam may escape from the unit.
• Ensure that the appliance is switched off before removing
it from its stand
• Allow the appliance to cool before fitting or removing any
parts and before cleaning.
• Do not put anything else in the coffee pot except for
coffee, sugar and water.
• Never use the coffee pot on other heaters or other way of
connection.
• Keep the mains cable away from the burning or any other
hot surfaces.
• Do not use the appliance if the carafe shows any sign of
cracks.
• If the appliance is over-filled, boiling water may be
ejected from the spout.
• Do no immerse the appliance, base, cord or plug in any
liquid.
• After use, do not touch heater surface, make sure the
heater surface is fully cooled. When cleaning, make sure
that the heater surface has cooled down.
4
ENGLISH (Original instructions)