Black+Decker DCM750S-B5, Оригинальное руководство пользователя

Страница: 4 / 20

• Do not allow children or any person unfamiliar with these
instructions to use the appliance.
• Do not allow children or animals to come near the work
area or to touch the appliance or power supply cord.
• Close supervision is necessary when the appliance is used
near children.
After use
• Switch off, remove the plug from the socket and let the
appliance cool down before leaving it unattended and
before changing, cleaning or inspecting any parts of the
appliance.
• When not in use, the appliance should be stored in a dry
place. Children should not have access to stored
appliances.
Inspection and repairs
• Before use, check the appliance for damaged or defective
parts. Check for breakage of parts, damage to switches
and any other conditions that may affect its operation.
• Do not use the appliance if any part is damaged or
defective.
• Have any damaged or defective parts repaired or replaced
by an authorised repair agent.
• Before use, check the power supply cord for signs of
damage, ageing and wear.
• Do not use the appliance if the power supply cord or mains
plug is damaged or defective.
• If the power supply cord or mains plug is damaged or
defective it must be repaired by an authorised repair agent
in order to avoid a hazard. Do not cut the power supply
cord and do not attempt to repair it yourself.
• Never attempt to remove or replace any parts other than
those specified in this manual.
Electrical safety
This product must be earthed. Always check that the
mains voltage corresponds to the voltage on the
rating plate.
Appliance plugs must match the outlet. Never modify the plug
in any way.
CAUTION : In order to avoid a hazard due to inadvertent
resetting of the thermal cut-out, the appliance must not be
supplied through an external switching device, such as a timer,
or connected to a circuit that is regularly switched on and off by
the utility.
Extension cables & class 1 product
• A 3 core cable must be used as your tool is earthed and of
class 1 construction.
• Up to 30m (100 ft) can be used without loss of power.
• If the supply cord is damaged, it must be replaced by the
manufacturer or an authorised BLACK+DECKER Service
Centre in order to avoid a hazard.
Mains plug replacement
If a new mains plug needs to be fitted:
• Safely dispose of the old plug.
• Connect the brown lead to the live terminal of the new plug.
• Connect the blue lead to the neutral terminal.
• If the product is class I (earthed), connect the green/yellow
lead to the earth terminal.
Note : If your product is class II double insulated (only 2 wires in
the cord set), no connection is to be made to the earth terminal.
Follow the fitting instructions supplied with good quality plugs.
Any replacement fuse must be of the same rating as the original
fuse supplied with the product.
Warning ! The above section on mains plug replacement is for
authorized service centre personals.
Additional safety instructions for coffee makers
Warning ! The lid may become hot during use.
Warning ! Steam may escape from the unit.
• Allow the appliance to cool before fitting or removing any
parts and before cleaning.
• During use, the carafe and the hotplate can get very hot.
• Do not use the appliance if the carafe shows any sign of
cracks.
• The element and external surfaces are subject to residual
heat after use
• Surfaces are liable to get hot during use
• Hot steam may escape from the vents
• Hot steam may escape when the door is opened
• Do not immerse the appliance in liquid.
Labels on appliance
The following pictogram is shown on the appliance:
Caution : hot surface.
Features
1. Filter
2. Funnel
3. Carafe lid
4. Carafe handle
5. Carafe
6. Warming plate
4
ENGLISH (Original instructions)