10
CLEANING TIPS
• For quick cleanup, combine 1 cup warm water and a drop of liquid dish
soap in the blending jar.
• Cover and blend on Speed 2 for about 30 seconds.
• Discard liquid and rinse thoroughly.
Important:
• Do not place the jar parts in boiling liquids.
• Do not immerse the base in liquid. Wipe the base with a damp cloth and
dry thoroughly.
• Remove stubborn spots by rubbing with a damp cloth and nonabrasive
cleaner.
Note:
If liquids spill onto the base, wipe with a damp cloth and dry thoroughly.
Do not use rough scouring pads or cleansers on parts or finish.
TROUBLESHOOTING
Problem
Possible Cause
Solution
Blender stops/
goes into
STANDBY mode
Blending time exceeds
2.5 minutes.
Re-select appropriate speed
setting to start blender.
LED blinking
quickly
Button held longer than
30 seconds.
Press On/Off button twice to turn
unit Off and On again.
All LEDs blinking
quickly
(100 msec/time)
Blender overheated or
button held longer than
30 seconds.
Unit must be reset. Unplug to
reset. Let unit cool for at least 20
minutes
BL1350DPC-P_IB_22113.indd 10
5/9/18 9:51 AM
Содержание BL1350DPC-P
Страница 31: ...31 ...