RETUNE (GLOBAL)
Selecting
RETUNE
allows you to retune Kijimi’s oscillators. Selecting this section of the
settings menu displays the following message: “TO START RETUNE PRESS ENTER.”
Pressing
BACK (BACK)
cancels the retuning process and returns you to the main
settings page.
Pressing
ENTER
will start the retune process. The display will now read:
“RECALIBRATION IN PROCESS.” Retuning takes approximately 10-20 seconds. When
complete, the screen display will update to “DONE.” Pressing
BACK (CNCL)
will cancel
calibration in the middle of the process.
When calibration is complete, the display will read “DONE.” Press
BACK (OK)
to return
to the patch selection screen.
MIDI SETTINGS
The
MIDI
settings section allows you to change how your MIDI sequencer or controller
interacts with Kijimi
MODE (GLOBAL)
The
MIDI
MODE
setting determines how Kijimi interacts with your MIDI controller,
based on the controller’s capabilities. There are 3 settings:
CHANNEL PRESSURE
,
POLY AFTERTOUCH
, and
MPE
.
● For basic MIDI controllers that are not capable of polyphonic aftertouch, select
the
CHANNEL PRESSURE
setting.
● For MIDI controllers that are capable of polyphonic aftertouch, select the
POLY
AFTERTOUCH
setting.
● For MIDI Polyphonic Expression (MPE) controllers such as Roli Seaboard, Roger
Linn Linnstrument, or Haken Continuum, select the
MPE
setting.
Rotate the
ENCODER
to select the appropriate option for your controller type, then
press
ENTER (SAVE)
to save your selection.
Press
BACK (CNCL)
at any time to cancel changes to the
MIDI MODE
settings and
return to the
MIDI
settings menu.
19
Содержание KIJIMI
Страница 17: ...17...
