Pressing
ENTER
will start the knob calibration process. The display will now read:
“RECALIBRATION IN PROCESS.” Calibration occurs instantly. When complete, the
screen display will update to “DONE.” Press
CANCEL (OK)
to return to the
CALIBRATION
settings screen.
OSCILLATORS (GLOBAL)
The
OSCILLATORS
setting allows you to tune the oscillators of all voices
simultaneously, or to tune oscillators on a per-voice basis.
The tune all voices simultaneously, select
TUNE ALL VOICES
. The display will update
to read “TO START AUTOTUNE PRESS ENTER.”
Pressing
CANCEL (BACK)
cancels the oscillator calibration process and returns you to
the
CALIBRATION
settings page.
Pressing
ENTER
will start the oscillator calibration process. The display will now read:
“OSC 1A TUNING,” and will display a progress bar. Calibration takes approximately 1-2
minutes per voice and must proceed from OSC 1A to OSC 1B to OSC 2A and so on.
Full calibration of all oscillators takes approximately 10 minutes. When complete, the
screen display will update to “DONE.” Press
CANCEL (OK)
to return to the
CALIBRATION
settings screen.
The tune voices individually, select the voice number you wish to tune. The process for
tuning individual voices is the same as above, but completes more quickly.
FILTERS (GLOBAL)
The FILTERS calibration functions work the same as the OSCILLATOR ones described
above.
MICROTUNING (GLOBAL)
The
MICROTUNING
setting allows you to enable or disable microtuning. Available
options include
ON
or
OFF
.
●
ON
: Microtuning is enabled. This also enables a new section of the
CALIBRATION
settings menu called
EDIT FREQS
. See the
EDIT FREQS
section of the manual for more detail.
●
OFF
: Microtuning is disabled.
32
Содержание KIJIMI
Страница 17: ...17...
