Black Box twister 7000, Инструкция по установке и эксплуатации

Страница: 9 / 48

“twister” Media Converter 7000 9
DISCONNECT ALL POWER
SOURCES BEFORE SERVICING
AC IN 90-250V
50/60Hz 1A
POWER
ACTIVE
Use anchors with a
minimum proof load
of at least 50lbs.
Because of its smaller size, the LE7306A chassis can be placed on
any flat surface. To save space and keep the installation area
organized, use the optional wall mount bracket. Follow these
simple instructions and refer to the diagram below:
• Place the bracket up against the wall and use a pencil to mark
where the anchors will be placed. Be sure that the chassis will
be mounted in such a way that fully exposes the front panel
for access to the network and power connections and does not
block the rear exhaust fan.
• Secure the bracket to the wall using anchors with a minimum
proof load of 50lbs.
• Place the LE7306A inside of the bracket and secure the chassis
to the bracket with the hardware provided.