Black Box twister 7000, Инструкция по установке и эксплуатации

Страница: 10 / 48

10 Installation Guide
Set the Switches and Jumpers.
Locate the switches and jumpers.
The following illustrations show the orientation of the DIP
switches and LLCF jumpers for the 10Mbps and 100Mbps
“twister” modules.
*
These illustrations are generalized and not
specific to a particular module. Refer to the “redundant twister”
module diagrams in the User Guide section of this document for
more detailed information on the location and setting of the DIP
switches for these particular modules.
RJ-45
LLCF
Jumpers
MDI-X Position
Slide Switch
JP1
3 2 1
LLCF
OFF
ON
3
2
1
RJ-45
LLCF
Jumpers
Slide Switch
MDI-II Position (default)
MDI-X Position
MDI-II Position (default)
This is a generalized diagram of a “twister”
10Mbps module (with the exception of the
LE7313C-R2 BNC or LE73XXC TELCO modules)
and is not specific to any particular module.
This is a generalized diagram of a “twister”
100Mbps module (with the exception of the
LH740XC “redundant twister” modules) and is
not specific to any particular module.
3
*
This is not applicable to the LE7313C-R2 (BNC) or the LE73XXC (TELCO) modules.