Black Box twister 7000, Инструкция по установке и эксплуатации

Страница: 26 / 48

26 User Guide
• LINK Switch DOWN (default): the module sends link on the
active port only; the end station connected to the module sees
a valid link state only if the port on the module is active.
• LLCF Switch UP: Link Loss Carry Forward is enabled.
• LLCF Switch DOWN (default): Link Loss Carry Forward is disabled.
• RED Switch UP (default): redundancy is enabled; the module
functions in Dynamic Recovery Mode (DRM).
• RED Switch DOWN: redundancy is disabled; Network Select Mode
(NSM) is enabled. NOTE: In this mode the reset push button toggles the
active port between A and B for each switch closure. The AUTO switch
selects the initial active port on power-up: UP for SECONDARY;
DOWN for PRIMARY. The SW LED remains OFF in NSM.
For more detailed information regarding the “redundant twister” module, refer
to the section titled Setting the DIP Switches in the “redundant twister”
Media Converter 7000 Installation & User Guide.
DIP Switches
RJ-45
RJ-45
RJ-45
1 2 3 4 5
RED
LLCF
LINK
AUTO
TX
10 BASE
M
A
I
N
P
R
I
S
E
C
RESET
LK
AT
LK
AT
LK
AT
SEC
PWR
SW