manualshive.com logo in svg

Black Box SW540A-R3, Руководство пользователя

Поделиться
Скачать
Black Box SW540A-R3 Скачать руководство пользователя страница 24

Setup and Configuration

23

2.1 Files on the LINKUP Disk

There are five files on your LINKUP disk:

1. LINKUP.EXE: The executable version of the

program.

2. LINKUP.CFG: A data file that keeps your

current configuration of the program (baud
rate, data bits, and so on).

3. LINKUP.DOC: The on-line user’s manual for

the COMS.

4. README.BBC: The LINKUP user’s manual

(this manual you’re reading).

5. INSTALL.BAT: The automatic installation

program to install LINKUP on your hard drive.

2.2 Making a Backup Copy

We encourage you to share this program with all
other users of the Code Operated Matrix Switch,
and to make a backup copy for your protection. You
may copy the disk freely, as long as:

• You make no changes to any file on this diskette.

• Each copy you make includes all files on the

original diskette.

• You include the following copyright notice on

all copies.

“Copyright © 1992. Black Box Corporation. All
rights reserved.”

DOS gives you two ways to make a backup copy. If
you have only one disk drive, use the DISKCOPY
command. If you have two disk drives, you’ll
probably find it more convenient to use COPY. (If
your disk drive can’t format a blank disk to match
the format of the LINKUP disk, you’ll have to use
the COPY command.) See your DOS manual for
help with any of the DOS commands used below.

2.2.1

M

AKING A

B

ACKUP WITH

DISKCOPY

1. Format a blank 360K diskette, to match the

format of the LINKUP diskette).

2. Place the LINKUP diskette in Drive A.

3. To make a backup copy, type:

A: 

(makes Drive A: the current working directory)

diskcopy

When DOS prompts you to “enter target disk,”
place your new blank disk in Drive A.

2.2.2

M

AKING A

B

ACKUP WITH

COPY

NOTE: You must have two disk drives to make a

backup with COPY.

1. Format a blank diskette and place it in Drive B.

2. Place the LINKUP diskette in drive A.

3. To make a backup copy, type:

A:\ 

(makes Drive A the current working directory)

copy *.* B: 

(copies all files from the LINKUP disk to the
blank disk in Drive B)

2. Setup and Configuration

Содержание SW540A-R3
































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды