Code Operated Matrix Switch
10
3.3Connecting Devices to the Ports
After you configure the internal switches and
jumpers, connect the Code Operated Matrix Switch
to the input/output devices:
1. Replace the Switch’s cover.
2. Connect the input/output device cables to
Ports 0-4 (or 0-8 if you have the 4-Port
Expansion Board) of the COMS.
3. Plug the wall-mounted power supply into a
suitable outlet.
The Switch is now ready. Go on to
Chapter 4
to
learn about the Switch’s controls and indicators.
You’ll control your switch mostly through ASCII
codes you send from the devices connected to it.
There are, however, mechanical controls and
indicators on the Code Operated Matrix Switch.
This chapter begins with the mechanical controls,
Sections 4.1
and
4.2
, and then treats the character
codes in the sections that follow.
