Black Box ServSwitch Wizard SW651A, Руководство пользователя

Страница: 46 / 60

44
SERVSWITCH™ WIZARD
Standard PS/2 mouse data uses a different data format than IntelliMouse data,
so two reset functions are provided on the ServSwitch Wizard. The type of data
format expected by the CPU depends upon the driver and the type of mouse that
was connected when the driver was booted. The following table may be used as a
guide; note that the mouse-reset functions predict the likely mouse
resolution
settings but may not restore the speed or sensitivity of the mouse exactly as they were
when the CPU originally booted:
Type of mouse/ Driver type: Probable Suggested
system connected expected restoration
at bootup: data format: command:
PS/2 PS/2 only PS/2 F5
PS/2 IntelliMouse PS/2 F5
IntelliMouse PS/2 only PS/2 F5
IntelliMouse IntelliMouse IntelliMouse F6
To restore lost mouse movement on a CPU connected to the ServSwitch Wizard:
1. Select the CPU that has lost its mouse movement.
2. Press and hold the pushbutton on the front of the ServSwitch Wizard for five
seconds until “C” appears in the front-panel display. The Wizard is now in
configuration mode.
3. To restore a PS/2 mouse connection, type the letter “F”, then the number “5”,
then [Enter]. Or, to restore an IntelliMouse connection, type the letter “F”,
then the number “6”, then [Enter].
4. Exit from configure mode by typing the letter “E” followed by [Enter].
5. Test the mouse movement by moving the mouse a short distance.