Black Box ServSwitch Wizard SW651A, Руководство пользователя

Страница: 19 / 60

17
CHAPTER 3: Installation
3.3.1 S
YSTEMS WITH A
S
INGLE
W
IZARD
Make sure that the Wizard is unplugged and powered down. If possible, turn off
and unplug all of the devices that you want to attach to it. (If you have to “hot-
plug” any powered computers into the Wizard, see
Section 5.8 .)
Connect your user equipment (keyboard, PS/2 mouse, and monitor) to the
appropriate “control port” connectors on the Wizard’s rear panel. If you have had
to place the Wizard farther from the user equipment than the equipment’s native
cables will reach—up to an additional distance of 30 ft. (9.1 m)—you can plug the
native cables into ServSwitch Duo User-Extension Cable. If you need to place your
user equipment farther away than that, you’ll need to use one of our ServSwitch
brand KVM extenders.
Next, connect each computer CPU to the Wizard by running cabling from the
CPU’s keyboard, mouse, and video ports to the matching connectors in one of the
Wizard’s “CPU ports.” This cabling can be either separate male-to-male keyboard-,
mouse-, and video-extension cables, or our three-in-one ServSwitch Duo CPU-
Extension Cable. If you need to run farther than 100 ft. (30.5 m) to a CPU, you’ll
need to use one of our ServSwitch brand KVM extenders.
A complete system using a single Wizard is shown in Figure 3-1.
Figure 3-1. System using a single ServSwitch Wizard (SW652A shown).
CPU
Extension
cabling
User-station
monitor
User-station keyboard
and mouse
ServSwitch Wizard