Black Box ServSwitch Wizard SW651A, Руководство пользователя

Страница: 43 / 60

41
CHAPTER 5: Operation
• Use {Hotkeys} + [0] to select nonexistent “channel zero” in order to shut off
the video output from the Wizard to the shared monitors. The Wizard’s front-
panel display will show “0”. You can re-enable video by selecting another
channel through the keyboard, front-panel pushbutton, on-screen menu, or
mouse.
• Use {Hotkeys} + [L] to lock the Wizard (disable its shared keyboard and mouse
and select nonexistent “channel zero” in order to shut off the video output
from the Wizard to the shared monitors). If a password has not been set (see
Section 4.2.10 ), the Wizard behaves exactly as if you had entered
{Hotkeys} + [0] (see above). If a password has been set, the Wizard displays “P”
to indicate that a valid password must be entered to unlock the switch; simply
type in the password followed by the [Enter] key to do so. Note that if anyone
has tried to type something at the shared keyboard while the Wizard is locked,
you will have to press [Enter] to clear those characters so that they won’t
invalidate the password when you proceed to type it in.
• Use {Hotkeys} + {Channel Address} to select a CPU channel in a cascaded
system (see Section 5.10 ). The {Channel Address} is a series of one- or two-digit
channel numbers that specify the “path” to follow to get from the master
ServSwitch Wizard (or ServSwitch Wizard LP, ServSwitch Wizard Pro, or
ServSwitch Duo) to the desired CPU channel on the subsidiary Wizard. The
numbers in the {Channel Address} can be single digits if
all of the switches in
the cascade are 2-, 4-, or 8-port switches; if any are 12- or 16-port switches, you’ll
have to add a leading zero before the single-digit numbers. For example, if you
want to access
→
CPU channel 16 on a “second-layer” subsidiary Duo connected to
→
CPU port 2 (“ 02 ”) on a “first-layer” subsidiary Wizard connected to
→
CPU port 1 (“ 01 ”) on the master Wizard, you would enter:
{Hotkeys} + [0][1][0][2][1][6].
To make sure that the Wizard doesn’t switch prematurely to the wrong
channel, hold down the hotkeys until you enter the last digit,
then release
them.