Black Box ServSwitch Wizard SW651A, Руководство пользователя

Страница: 34 / 60

32
SERVSWITCH™ WIZARD
4.2.7 C
HOOSING
A
CTIVE
P
ORTS OR
A
LL
P
ORTS FOR
K
EYBOARD
-T
AB AND
M
OUSE
S
WITCHING
In the ServSwitch Wizard’s factory-default state, when you “cycle through” the CPU
ports on the Wizard by pressing {Hotkeys} + [Tab] or when you switch to the next
or previous channel with your mouse, the Wizard stops at
every channel. It does this
even if the device attached to a particular channel is off or not outputting video, or
even if there
isn’t any device attached to that channel. (The Wizard will display a
blank screen for such channels.) But if you’d rather have the Wizard “skip over”
any ports that don’t have a powered-up computer or cascaded switch connected to
them, you can send it the [U][8] command.
U7 Switch to all ports when switching with {Hotkeys} + [Tab] or with the mouse
(default)
U8 Switch only to active ports when switching with {Hotkeys} + [Tab] or with
the mouse
The U7/U8 setting has no effect on autoscanning (see Section 4.2.3 ) or on
switching with {Hotkeys} + [ digit ], with the front-panel pushbutton, or through the
RS-232 serial interface.