53
CHAPTER 6: Troubleshooting
6.2 The Maintenance-Mode Functions
You can access a number of useful troubleshooting
functions of the ServSwitch Wizard by activating the
Switch’s “maintenance mode.” Do this by holding down
the top-panel channel-change pushbutton for 5 seconds
until the Switch’s channel LEDs (LEDs 1 and 2) both
light at the same time. (Even in this mode, the Switch
will keep performing keyboard and mouse emulation
on all ports at all times in order to keep errors from
occurring on the attached CPUs.) While you’re in
maintenance mode, press the “1,” “2,” “3,” or “4” key
on the shared keyboard (
not
on the numeric keypad),
or the channel-change pushbutton on the top panel
of the Switch, to trigger these functions:
•
Restore a CPU mouse connection or synchronize a
CPU PS/2 mouse connection
(see
Section 6.2.1
)
:
Press the “1” or “2” key on the shared keyboard to
reset the PS/2 mouse or IntelliMouse connection,
respectively, on the currently selected computer
port. Press the “4” key on the shared keyboard to
attempt to synchronize the mouse connection on
the currently selected computer port.
