Black Box ServSensor JR EME102A, Руководство пользователя, Страница: 48 / 135

46
ServSensor JR
46
2.1.11 S
MOKE
D
ETECTOR
An important addition to security and safety: These smoke detectors
are easy to install and configure. The smoke detector must be mounted
on the ceiling for maximum smoke detection.
The value of the Status for the OID for switch sensors can be
“normal” , “noStatus” , “critical” or “sensorError” .
A popular OID for Smoke Detector Sensors is the status. For RJ45 #1
it is
OID .1.3.6.1.4.1.3854.1.2.2.1.18.1.3.0
Features:
•
On/Off alarm signal of Smoke Detected
•
Accurate, cost effective Smoke Detector
•
LED indicates the status of Smoke Detector
•
Sensor type - open/closed contact switch
•
Up to 2 Smoke Detector Sensors per ServSensor JR
•
Includes disconnect alarm that checks that the sensor is
securely plugged into the ServSensor JR
Configuring the Smoke Detector
Since all of BLACK BOX's intelligent sensors are configured similarly
not every field is described below. The descriptions below describe the
fields that are special to the Smoke Detector.
For a general description about configuring all sensors including
information regarding common configuration parameters please see the
Installing and Configuring Sensors page.