Black Box ServSensor JR EME102A, Руководство пользователя, Страница: 133 / 135

131
CONTENTS
131
A: Possible causes may be:
a) The destination TRAP IP is not set in the TRAP settings page.
b) The community entered is wrong.
c) The firewall is blocking the TRAP traffic.
d) The send Trap option is Off.
Q: I have HP OpenView, but I’m not able to receive the Traps.
A: Possible causes may be:
a) For changing the Traps to HP OpenView style, you need to send an
SNMP command to the device given below:
SNMPset <IP> <community> .1.3.6.1.4.1.3854.1.2.2.1.60.0 i X
Where:
IP is the IP address of the ServSensor JR
community default is "public"
X can take 3 values: 1 (WhatsUP gold style), 2 (HP OpenView Style),
3 (both Style). By default, the X value set is 1 .
Q: I have assigned the gateway IP, and when I say set, it reverts
back to the default IP?
A: This happens when the device is not able to find the IP entered.
When the IP is entered, the device searches for the IP, if it’s found, it
will accept the IP entered, else it will revert back to the default IP.
Q: Is the temperature sensor built inside the ServSensor JR?