Black Box ServReach KVMultiport KVMoIP, Руководство пользователя

Страница: 42 / 64

724-746-5500 | blackbox.com
Page 42
Chapter 18: Troubleshooting—Safe Mode
18. Troubleshooting—Safe Mode
From Safe mode you can:
Restore factory defaults—When you cannot access the system—for example, you have forgotten the user name or password—
restore factory defaults from Safe mode. (Chapter 15 explains how to restore factory settings from the Web interface).
Restore the device firmware—If during a firmware update there is a power failure and you can no longer access the system, you
can restore the device firmware from Safe mode.
18.1 Entering Safe Mode
To enter Safe mode:
1. Press and hold down the Local button for 3–4 seconds and at the same time power up the ServReach KVMultiport. The device
boots up in Safe mode.
2. Wait until the unit finishes booting (1–2 minutes).
3. You need to know the IP address of the ServReach KVMultiport. The IP address depends on whether there is a DHCP server on
the network. If there is, the DHCP server assigns an IP address to the Smart 108/116 IP. If there is no DHCP server, the unit
boots with the static IP address 192.168.2.155. See Figure 18-1 for an overview of this procedure.
Figure 18-1. Safe Mode procedure.
Open Internet Explorer and type the following into the Address dialog box: http://IP address/config. (Do not start the address
with https). The Login page appears.