Black Box PSE544, Руководство пользователя

Страница: 28 / 50

26
Power Switch Cabinet 4-port New Generation
3.3.8.1. Settings / Rules - Schedule Rule
This rule can be used to trigger user-specified actions according to a defined time table. The schedule rule is
weekday based and the administrator can declare, for each weekday, a start time, an end time and after what time
the rule should be repeated.
The schedule rule can also be used to send status information on specified weekdays at regular interval.
Activated
This check box must be checked to activate the Rule and enables to deactivate temporarily a rule while keeping all
its settings for a later use.
Rule ID:
The Power Switch PSE544 automatically creates an ID Code to clearly identify each rule. All the ID Codes used to
identify rules start with the letter "R" followed by a number from 1 to 32. If you delete a rule in the middle of the Rule
list, the number of this rule will only be used again if no other rule is available.
Rule Name:
In this field, enter the name you want to give to the rule. The name can be from 1 to 32 characters long, and can
contain alphanumeric characters.
Do not use quotes or special characters in labels!
Rule Color:
In this field, select one of the 48 standard colours you want to use to highlight the rule when executed. To use own
colours, just type in the Hex value of the colour you want. The Rule highlighting allows to quickly identify the
triggered rule when displayed in the Rule Panel page or in a special user's page.
Rule Type:
In this drop-down list, choose Schedule Rule then configure the event and the actions to perform.
Configuring the Event
Schedule Action:
Here you can define the time when the rule has to be executed. In the Drop-Down lists choose the time and below,
check one or more day boxes.
Start Time
Defines what time the rule starts.
Repeat Time
Defines the time period in which the rule repeats.
Repeat Time cannot be set to zero.