Black Box PSE544, Руководство пользователя

Страница: 20 / 50

18
Power Switch Cabinet 4-port New Generation
3.3.5.2 Settings / Accounts / Hidden Page account
This account is intended for developers who want to implement the power outlet control in own programs. If
activated, they can access to a special page named hidden.htm and control individually the power outlets using
simple commands.
- To activate or deactivate this account, check or uncheck the corresponding checkbox.
- To modify the Hidden page account, click on "Edit" next to the corresponding account.
A new page appears, allowing you to set all the parameters of the account.
Activated
This check box must be checked to activate the Hidden Page Account. It enables to deactivate temporarily this
account while keeping all its settings for a later use. The Hidden Page Account cannot be deleted.
User Name
In this field, enter the name you want to give to the Hidden Page Account.
The user name can be up to 32 characters long and contain alphanumeric characters.
Do not use quotes or special characters in labels!
Password
In this field, enter the password you want to give to the Hidden Page Account.
The password can be up to 32 characters long and contain alphanumeric characters.
Confirm Password
In this field, enter the password again for confirmation.
IP Address Control
Network security can be increased by IP address filtering. Check this checkbox and specify an IP address or a
range of IP addresses which has the right to access to the Hidden Page Account.
Groups
This field appears only if at least one group has already been created. To create a group, go to the
Settings/Groups Page.
- To add an existing group of Power Outlets to the current account, select the group you want to add in the left field
and click on the Arrow button, the group will then appear in the right field.
- To remove a Group from the current account, select the group you want to remove in the right field and click on
the Arrow button, the group will then appear in the left field.
Each group is clearly identified by its own ID (G1, G2, G3...) followed by the name given during the
configuration. If the symbol "!" appears between brackets behind the ID Code that means that the Group is
not activated. To activate it, go to the "Settings/Groups" page.