
7
CHAPTER 1: ENCODERS
1.877.877.2269
BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
1.6 OPERATION CONTROLS AND FUNCTIONS
1.6.1FRONT PANE
L
TABLE 1-1. FRONT-PANEL COMPONENTS
NUMBER IN FIGURE 1-1
COMPONENT
DESCRIPTION
1
(1) Power LED indicator
Lights ON or OFF for Power
2
(1) Status LED block
GbE LED:
This LED will illuminate and blink to indicate a live and active connection
on the local gigabit Ethernet port.
VIDEO LED:
This LED will illuminate Green when a video signal is live on the optical
fiber streaming port or illuminate Amber when streaming a detected input stream.
When no video is active, the LED will remain off, even if the streaming connection is
valid.
LINK LED:
These LEDs will illuminate and blink to indicate data transmission and
reception activity across the optical fiber streaming connection.
USB LED:
This LED will illuminate when the unit’s USB ports have successfully
paired with the USB ports on another unit. This LED will blink if the unit’s USB ports
are not currently paired and are in stand-by mode.
3
(1) Menu button
Press to enter the OSD menu or to back out from menu items.
4
(1) Menu button: - Minus button
Press to move up or adjust selections within OSD menus. When not in a menu,
press to manually switch between encoder source inputs.
5
(1) Menu button: + button
Press to move up or adjust selections within OSD menus. When not in a menu,
press to manually switch between decoder source inputs.
6
(1) Enter/Info button
When inside an OSD menu, press to confirm a selection or to go deeper into a menu
item. When not in a menu, press to activate the Information OSD.
FIGURE 1-1: FRONT PANEL