4
CHAPTER 1: ENCODERS
1.877.877.2269
BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
1.1 INTRODUCTION
This Encoder is designed for high-quality, IP routable, AV extension with virtually zero latency. The unit is capable of transmitting AV
and other data for long extension, enhancing the flexibility of any installation. By using a sophisticated ultra-light compression scheme
(lossless for most content) it is a great solution for extending 4K audio/video streams (HDMI or DisplayPort) and data. Advanced HDMI
content, such as HDR (High Dynamic Range), 10-bit color and multi-channel HD Bitstream audio, can be transmitted in pass-through
mode.
For the copper encoder, the use of high-quality, 10-Gbps Ethernet ports and Cat.6A or better cable allows for point-to-point transmission
of the video signal up to 100m.
For the fiber encoder, the use of interchangeable, field replaceable, SFP+ modules allows for transmission distances of up to 30km.
(Maximum transmission distance depends on the SFP+ modules used.)
Multiple control and data signals may also be transmitted along with the audio and video, including IR, RS-232, and Ethernet.
When combined with the optional MCX Gen2 Controller,or control software, the functionality of the Transceiver expands exponentially.
Multiple encoders/decoders may be combined with one or more 10-Gigabit fiber Ethernet switches. The units can be used together to
form a distributed video matrix, a multi-viewer system, or a video wall system. This AV network capability provides flexibility in large event
installations.
The integrated USB hub of each decoder can be configured to be in USB Host or Device Mode. It can function as a simple point-to-
point KVM extension, freely routed between any two endpoints, or it can be configured into a special “Simultaneous” mode, allowing
up to 7 Host Mode units to extend their USB ports to a single Device Mode unit. This type of USB KVM routing flexibility enables a
wide range of multi-user, control room, or on-demand installation scenarios.
The built-in EDID and HDCP management functionality enables the unit to fit into every video distribution situation. Basic configuration
of the unit can be achieved via front panel buttons with an OSD (On-Screen Display). Advanced control requires the optional MCX Gen2
controller, or control software, and a LAN connection.
1.2 APPLICATIONS
Video, Audio, LAN, IR, and USB over copper cable or fiber extension
Long distance data and video transmission immune to RF interference
Point-to-point secure video conferencing
Hotel or convention center display
Multi-monitor broadcast
Distributed video matrix system
Distributed video wall system
Remote KVM system control
1.3 PACKAGE CONTENTS
(1) UHD+ copper or fiber transmitter
(1) 12V/3A DC power adapter
(1) Power cord
(1) IR emitter