
34
CHAPTER 2: DECODERS
1.877.877.2269
BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
2.1 INTRODUCTION
This Decoder is designed for high-quality, IP routable, AV extension with virtually zero latency. The unit is capable of receiving AV and
other data for long extension, enhancing the flexibility of any installation. By using a sophisticated ultra-light compression scheme
(lossless for most content) it is a great solution for extending 4K audio/video streams (HDMI or DisplayPort) and data. Advanced
HDMI content, such as HDR (High Dynamic Range), 10-bit color and multi-channel HD Bitstream audio, can be transmitted in pass-
through mode.
For the copper decoder, the use of high-quality 10-Gbps Ethernet ports and Cat.6A or better cable allows for point-to-point
transmission of the video signal up to 100m.
For the fiber decoder, the use of interchangeable, field replaceable, SFP+ modules allows for transmission distances of up to 30km.
(Maximum transmission distance depends on the SFP+ modules used.)
Multiple control and data signals may also be transmitted along with the audio and video, including IR, RS-232, and Ethernet.
When combined with the optional MCX Gen2 Controller, or control software, the functionality of the Transceiver expands
exponentially. Multiple encoders/decoders may be combined with one or more 10-Gigabit fiber Ethernet switches. The units can be
used together to form a distributed video matrix, a multi-viewer system, or a video wall system. This AV network capability provides
flexibility in large event installations.
The integrated USB hub of each decoder can be configured to be in USB Host or Device Mode. It can function as a simple point-to-
point KVM extension, freely routed between any two endpoints, or it can be configured into a special “Simultaneous” mode, allowing
up to 7 Host Mode units to extend their USB ports to a single Device Mode unit. This type of USB KVM routing flexibility enables a
wide range of multi-user, control room, or on-demand installation scenarios.
The built-in EDID and HDCP management functionality enables the unit to fit into every video distribution situation. Basic
configuration of the unit can be achieved via front panel buttons with an OSD (On-Screen Display). Advanced control requires the
optional MCX Gen2 controller, or control software, and a LAN connection.
2.2 APPLICATIONS
Video, Audio, LAN, IR, and USB over Copper Cable or Fiber extension
Long distance data and video transmission immune to RF interference
Point-to-Point Secure Video Conferencing
Hotel or convention center display
Multi-monitor broadcast
Distributed video matrix system
Distributed video wall system
Remote KVM system control
2.3 PACKAGE CONTENTS
(1) UHD+ Copper or Fiber Receiver
(1) 12V/3A DC Power Adapter
(1) Power CordMulti-monitor broadcast
Distributed video matrix system
Distributed video wall system