Black Box LPB2910A, Руководство пользователя

Страница: 296 / 367

Publication date: Sept, 2015
Revision A1
284
3-­‐10.2.2 Group Information
The section describes how to set the MLD Snooping Groups Information. The "Start from VLAN", and
"group" input fields allow the user to select the starting point in the MLD Group Table.
Web Interface
To display the MLD Snooping Group information in the web interface:
1. Click Monitor, MLD Snooping, Group Information.
2. If you want to auto-­‐refresh the information, then you need to select “Auto-­‐refresh.”
3. Click “ Refresh“ to refresh an entry of the MLD Snooping Group Information.
4. Click “ Clear“ to clear the MLD Snooping Groups information.
Figure 3-­‐10.2.2: The MLD Snooping Groups Information
Parameter description:
Navigating the MLD Group Table
Each page shows up to 99 entries from the MLD Group table, default is 20, selected through the
"entries per page" input field. When first visited, the web page will show the first 20 entries from the
beginning of the MLD Group Table.
The "Start from
VLAN
" and "group" input fields allow the user to select the starting point in the MLD
Group Table. Clicking the button will update the displayed table starting from that or the closest next
MLD Group Table match. In addition, the two input fields will—upon a button click—assume the value
of the first displayed entry, allowing for continuous refresh with the same start address.
The switch will use the last entry of the currently displayed table as a basis for the next lookup. When
the end is reached, the text "No more entries" is shown in the displayed table. Use the button to start
over.
MLD Snooping Information Table Columns

VLAN ID:
VLAN ID of the group.
 Groups:
Group address of the group displayed.
 Port Members:
Ports under this group.