manualshive.com logo in svg

Black Box LPB2910A, Руководство пользователя

LPB2910A (Black Box) - мощный устройство с высоким качеством звука и различными функциями. Если вам нужна инструкция по использованию, вы можете скачать бесплатное руководство пользователя для LPB2910A на нашем веб-сайте. Настройте свою музыку с легкостью! (website)

Поделиться
Скачать
background image

  Publication  date:  Sept,  2015 

    Revision  A1

 

116 

Parameter   description:   

 

MVR   Mode   

Enable/Disable   the   Global   MVR.   
The   Unregistered   Flooding   control   depends   on   the   current   configuration   in   IGMP/MLD   Snooping.   It   
is   suggested   to   enable   Unregistered   Flooding   control   when   the   MVR   group   table   is   full.   

 

Delete   

Check   to   delete   the   entry.   The   designated   entry   will   be   deleted   during   the   next   save.

   

 

MVR   VID   

Specify   the   Multicast   VLAN   ID.   

CAUTION:

   MVR   source   ports   are   not   recommended   to   overlap   with   management   VLAN   ports.   

 

MVR   Name   

MVR   Name   is   an   optional   attribute   to   indicate   the   name   of   the   specific   MVR   VLAN.   The   maximum   
length   of   the   MVR   VLAN   Name   string   is   32.   MVR   VLAN   Name   can   only   contain   alphabetic   
characters   or   numbers.   When   the   optional   MVR   VLAN   name   is   given,   it   should   contain   at   least   one   
alphabetic   character.   The   MVR   VLAN   name   can   be   edited   for   the   existing   MVR   VLAN   entries   or   it   

can   be   added   to   the   new   entries.       

 

IGMP   Address   

Define   the   IPv4   address   as   the   source   address   used   in   an   IP   header   for   IGMP   control   frames.   

    The   default   IGMP   address   is   not   set   (0.0.0.0).   

    When   the   IGMP   address   is   not   set,   the   system   uses   IPv4   management   address   of   the   IP   interface   
associated   with   this   VLAN.   

    When   the   IPv4   management   address   is   not   set,   the   system   uses   the   first   available   IPv4   
management   address.   
    Otherwise,   the   system   uses   a   pre-­‐defined   value.   By   default,   this   value   will   be   192.0.2.1.

   

 

Mode   

Specify   the   MVR   mode   of   operation.   In   Dynamic   mode,   MVR   allows   dynamic   MVR   membership   
reports   on   source   ports.   In   Compatible   mode,   MVR   membership   reports   are   forbidden   on   source   
ports.   The   default   is   Dynamic   mode.   

 

Tagging   

Specify   whether   the   traversed   IGMP/MLD   control   frames   will   be   sent   as   Untagged   or   Tagged   with   

MVR   VID.   The   default   is   Tagged.   

 

Priority   

Specify   how   the   traversed   IGMP/MLD   control   frames   will   be   sent   in   prioritized   manner.   The   default   
Priority   is   0.   

 

LLQI   

Define   the   maximum   time   to   wait   for   IGMP/MLD   report   memberships   on   a   receiver   port   before   
removing   the   port   from   multicast   group   membership.   The   value   is   in   units   of   tenths   of   a   second.   

The   range   is   from   0   to   31744.   The   default   LLQI   is   5   tenths   or   one-­‐half   second.   

 

Interface   Channel   Setting   

When   the   MVR   VLAN   is   created,   click   the   Edit   symbol   to   expand   the   corresponding   multicast   
channel   settings   for   the   specific   MVR   VLAN.   Summary   about   the   Interface   Channel   Setting   (of   the   
MVR   VLAN)   will   be   shown   besides   the   Edit   symbol.   

 

Port   

The   logical   port   for   the   settings.   

 

Port   Role   

Configure   an   MVR   port   of   the   designated   MVR   VLAN   as   one   of   the   following   roles.   

Содержание LPB2910A
















































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для LPB2910A

Cabletron Systems MMAC-Plus 9G426-02 Reference Manual preview
MMAC-Plus 9G426-02
Бренд: Cabletron Systems Страницы: 12
Cabletron Systems MMAC-Plus 9F310-02 Appendix preview
MMAC-Plus 9F310-02
Бренд: Cabletron Systems Страницы: 4
Cabletron Systems 9E423-36 Owner'S Manual preview
9E423-36
Бренд: Cabletron Systems Страницы: 16
cable matters 101065 Quick Start Manual preview
101065
Бренд: cable matters Страницы: 4
CableCreation CD0395 User Manual preview
CD0395
Бренд: CableCreation Страницы: 7
3onedata TNS5800-8GP16GT-P24VDC Quick Installation Manual preview
TNS5800-8GP16GT-P24VDC
Бренд: 3onedata Страницы: 3
Tecsis MagSwitch Operating Manual preview
MagSwitch
Бренд: Tecsis Страницы: 2
Broadcast Tools Sentinel 3 Installation And Operation Manual preview
Sentinel 3
Бренд: Broadcast Tools Страницы: 28
Teseq NSG 439 User Manual preview
NSG 439
Бренд: Teseq Страницы: 60
LIVOLO VL-C302S-61 Manual preview
VL-C302S-61
Бренд: LIVOLO Страницы: 14
UfiSpace S9180-32X Hardware Installation Manual preview
S9180-32X
Бренд: UfiSpace Страницы: 25
Equip Vision 332702 Manual preview
Vision 332702
Бренд: Equip Страницы: 10
Black Box SI1P-SH-DVI-UCAC User Manual preview
SI1P-SH-DVI-UCAC
Бренд: Black Box Страницы: 16
ROSSMA IIOT-AMS Tilt Counter Operation Manual preview
IIOT-AMS Tilt Counter
Бренд: ROSSMA Страницы: 13
Digitus DS-55511 Manual preview
DS-55511
Бренд: Digitus Страницы: 10
Gigacore GNS-801G User Manual preview
GNS-801G
Бренд: Gigacore Страницы: 8
jbc P105 Instruction Manual preview
P105
Бренд: jbc Страницы: 4
TRENDnet TU2-700 - DATA SHEETS Quick Installation Manual preview
TU2-700 - DATA SHEETS
Бренд: TRENDnet Страницы: 9

Бренды по названию

Популярные бренды

Загрузить еще бренды