Publication date: , 2015
Revision A1
84
configuration.
clear access-list ace statistics
Use the clear access-list ace statistics
privileged EXEC command to clear the
statistics maintained by access-list,
including access-list interface statistics
and ACE's statistics.
15
EXEC
show access-list ace-status [ static ] [ link-oam ]
[ loop-protect ] [ dhcp ] [ ptp ] [ upnp ]
[ arp-inspection ] [ mep ] [ ipmc ] [ ip-source-guard ]
[ ip-mgmt ] [ conflicts ] [ switch <switch_list> ]
Use the show access-list ace-status
privilege EXEC command without
keywords to display the access-list ace
status for all access-list users, or
particularly the access-list user for the
access-list ace status. Use conflicts
keyword to display the access-list ace
that doesn't apply on on the hardware.
In other word, it means the specific ACE
is not applied to the hardware due to
hardware limitations.
15
EXEC
show aggregation [ mode ]
15
EXEC
aggregation mode { [ smac ] [ dmac ] [ ip ] [ port ] }
15
GLOBAL_CONFIG
no aggregation mode
15
GLOBAL_CONFIG
aggregation group <uint>
15
INTERFACE_PORT_LIST
no aggregation group
15
INTERFACE_PORT_LIST
ip arp inspection
Use the ip ARP inspection global
configuration command to globally
enable ARP inspection. Use the no form
of this command to globally disable ARP
inspection.
13
GLOBAL_CONFIG
ip arp inspection vlan <vlan_list>
Use the ip ARP inspection global
configuration command to globally
enable ARP inspection. Use the no form
of this command to globally disable ARP
inspection.
13
GLOBAL_CONFIG
ip arp inspection vlan <vlan_list> logging { deny |
permit | all }
13
GLOBAL_CONFIG
no ip arp inspection vlan <vlan_list> logging
13
GLOBAL_CONFIG
ip arp inspection entry interface <port_type_id>
<vlan_id> <mac_ucast> <ipv4_ucast>
13
GLOBAL_CONFIG
arp_inspection_translate
13
GLOBAL_CONFIG
