Publication date: , 2015
Revision A1
105
enter the Guest VLAN if an EAPOL
frame has not been received on the port
for the life-time of the port. If enabled
(checked), the switch will consider
entering the Guest VLAN even if an
EAPOL frame has been received on the
port for the life-time of the port.
dot1x radius-qos
Enables/disables per-port state of
RADIUS-assigned QoS.
15
INTERFACE_PORT_LIST
dot1x radius-vlan
Enables/disables per-port state of
RADIUS-assigned VLAN.
15
INTERFACE_PORT_LIST
dot1x feature { [ guest-vlan ] [ radius-qos ]
[ radius-vlan ] }*1
Globally enables/disables a dot1x
feature functionality
15
GLOBAL_CONFIG
show dot1x statistics { eapol | radius | all}
[ interface <port_type_list> ]
Shows statistics for either eapol or
radius.
0
EXEC
ntp
Enable NTP
13
GLOBAL_CONFIG
ntp server <1-5> ip-address
{<ipv4_ucast>|<ipv6_ucast>|<hostname>}
13
GLOBAL_CONFIG
ntp server <1-5> ip-address
{<ipv4_ucast>|<hostname>}
13
GLOBAL_CONFIG
no_ntp_server_ip_address
13
GLOBAL_CONFIG
show ntp status
13
EXEC
show platform phy [ interface <port_type_list> ]
Show PHY module's information for all
or a given interface
15
EXEC
show platform phy id [ interface <port_type_list> ] Platform PHY's IDs
15
EXEC
show platform phy instance
15
EXEC
show platform phy failover
15
EXEC
platform phy instance restart { cool | warm }
15
EXEC
platform phy instance default-activate
15
EXEC
show platform phy status [interface
<port_type_list>]
15
EXEC
no platform phy instance
15
GLOBAL_CONFIG
platform phy failover
15
INTERFACE_PORT_LIST
debug phy read [ <0~31> ] [ <0-0xffff> ]
[ addr-sort ]
debug INTERFACE_PORT_LIST
debug phy write [ <0~31> ] <0-0xffff> [ <0-0xffff> ]
debug INTERFACE_PORT_LIST
debug phy do-page-chk [enable|disable]
debug EXEC
debug phy force-pass-through-speed {1G | 100M |
debug INTERFACE_PORT_LIST
