CITYLIGHT FIBRE CHANNEL CARD
15
Rail Voltage
The voltage actually present at the card. In non-redundant PSU chassis this
can be used to monitor the state of the power supply and should always be
greater than 4.9V.
PSU
This field gives an indication of the operating state of the PSUs in the
CityLIGHT chassis associated with the transceiver displayed, i.e. the local or
remote CityLIGHT chassis. The displayed state of the PSUs can be any one
of the following:
i)
Good.
ii) Under voltage (the voltage on the card is too low).
iii) Over voltage (the voltage on the card is too high).
Serial Number
This field gives the serial number of the CityLIGHT Fibre Channel Card in the
selected slot of the CityLIGHT management chassis.
Firmware Version Number
The factory loaded firmware version resident on the Fibre Channel Card.
Location
The location is entered by the user; see CityLIGHT SNMP Card installation
manual for details.
Other Managed Features
The CityLIGHT SNMP Card also monitors the PSUs and cooling fans of
chassis. Refer to the installation manual supplied with the CityLIGHT SNMP
Card for more details.
2.8 Shipping Contents
The shipping carton contains:
This manual (1)
CityLIGHT Fibre Channel Card (1)
