CITYLIGHT FIBRE CHANNEL CARD
13
2.5 Ergonomics
The CityLIGHT Fibre Channel Card is able to be installed in any of the
CityLIGHT chassis types.
2.6 Power Supply
The CityLIGHT Fibre Channel Card receives all its power requirements from
the PSUs mounted in the CityLIGHT chassis. Consult your chassis manual for
details.
2.7 Management
The CityLIGHT Gigabit Ethernet Card is managed via the CityLIGHT SNMP
Card.
Once installed in a chassis with an SNMP card or connected via the fiber to a
card in an SNMP-managed chassis, the SNMP agent automatically detects
the card and displays the following information.
NOTE:
This information is the same for the local and remote cards and
is available via the terminal interface as well as the SNMP MIB.
i)
Card Type.
ii) Fiber Port Link Status.
iii) Temperature.
iv) Fan Status.
v) Laser Bias Current Alarm.
vi) Receive Power.
vii) PSU Voltage.
viii) Redundant PSU State.
ix) Serial Number.
x) Firmware Version Number.
xi) Location.
Card Type
The type of the card in the slot (Fibre Channel in this case).
