Black Box IS300AE, Руководство пользователя

Страница: 27 / 112

28
ISDN TA/V
5.4.3 S
OFTWARE
H
ANDSHAKING
C
ABLE AND
S
ETUP
C
OMMAND
The cable used to connect the DTE interface to a Macintosh using
communication software which requires software handshaking is shown
in Figure 5.3:
Figure 5.3 Pinning for Software Handshake Cable for Macintosh
When using this cable, a small change will have to be made to the ISDN
TA/V’s operating configuration before a communications link can be
established. Having connected the DTE interface to the Macintosh, switch
on power to the ISDN TA/V. Following the instructions given in your
communication software manual, use the software to change the ISDN
TA/V’s operating configuration by typing the following command:
AT\Q1&D2&W<CR>
Within this command string, the characters &W indicate that the command is
to be stored in memory, and loaded automatically each time the ISDN TA/V
is powered on. (See the Reference section for more details about this and
other command lines.)
1 2
3 4 5
6 7 8
20
2 3 7 8