Black Box IS300AE, Руководство пользователя

Страница: 18 / 112

19
Chapter 3: Installing ISDN TA/V Using the Intro Program
3.5 Navigating Through the Intro Screens
When using a mouse to select the appropriate action button, position the
mouse cursor directly over the required action and press the left-hand mouse
button once to select it.
When navigating around the screen using keyboard commands, use the arrow
keys, tab key and shift tab keys to highlight the required option, and the
carriage-return key to action it. Note that the escape key can be used to action
an
EXIT button.
3.6 Running Intro from DOS
To run the Intro software from DOS from the root directory of your hard disk
select the sub-directory into which you copied Intro , and type:
INTRO<CR>
3.7 Using Intro to Configure the ISDN TA/V
A powerful function of the Intro software is that it enables you to alter the
ISDN TA/V’s factory-default configuration settings, using simple menu
selections. However, as previously mentioned, the factory-default
configuration will normally be sufficient for most ISDN TA/V users, and may
never need to be altered.
We therefore recommended that this function of the Intro software only be
used by experienced communications device operators, and then only in
conjunction with the reference instructions in Part II of this manual.
If you alter the definition of the DTE interface (from its default setting
of V.24/V.28 asynchronous data),
Intro will immediately lose contact with,
and no longer be able to communicate with, the ISDN TA/V. Using the
management interface of the
CONTROL port then becomes the easiest
way of commanding the ISDN TA/V. (The Reference section includes
instructions for using this management interface).