Black Box DESKTOP TELCO, Руководство пользователя

Страница: 33 / 66

TELCOLINK DT - AccessDSL NTU
User Manual
Version: 2.5 Page 33 of 66
7.2.9.3 STATUS Command
SYNTAX: STATUS or ST
The STATUS command displays the actual system status:
CO_FMM>STATUS
----------------------------------------------------------------------
Local System Status
----------------------------------------------------------------------
LOSD : 1
SEGA : 1
PS : 1
SEGD : 1
Tx power : 07.5 dBm
Rx gain : 07.3 dB
Loop attn.: 00.2 dB
SNR : 35.8 dB
Bitrate : 0648 kbit/s
SRU # : 1
ANNEX : A
----------------------------------------------------------------------
CO_FMM>
Definitions:
LOSD:
(Loss of Signal) Indicates the loss of signal from the application
interface. Loss of Signal = 0, Normal = 1.
SEGA: (Segment Anomaly) Indicates a CRC error on the incoming xDSL
frame. A segment anomaly indicates that a regenerator operating
on a segment has received corrupted data and therefore the
regenerated data is unreliable. CRC Error =0, Normal = 1.
PS: (Power Status)
SEGD: (Segment Defect)
Tx power: Local transmit power in dBm
Rx gain: Local receiver gain in dB
Loop attn.: Estimate of the loop attenuation in dB of the actual connection
SNR: SNR is the ratio of constellation power to equalizer error power
Bitrate: Bitrate of the actual connection
SRU #: Number of detected repeater in loop
ANNEX ITU-T Rec. G.991.2 ANNEX
Note: Units in Multipoint and Dual Pair modes represent data for both xDSL interfaces.