Black Box DESKTOP TELCO, Руководство пользователя

Страница: 24 / 66

TELCOLINK DT - AccessDSL NTU
User Manual
Version: 2.5 Page 24 of 66
7 MONITOR
7.1 General
The module can be connected to a terminal or a PC (with terminal emulation) in order to monitor
relevant events and to display additional information such as the signal quality of the xDSL link or
the G.826 error performance parameters. In addition, full system configuration and fault localization
can be done over the monitor interface
The terminal for monitoring should be VT100 compatible and configured as follows:

9600 baud, asynchronous

8 bits, no parity, one stop bit

no new line on carriage return (i.e. no line feed on carriage return)
7.2 Structure & Organization
The structure and organization of the Black Box Network Services monitor is adapted to ITU-T
Recommendation M.3400 for TMNs with its five sub-sets.
Sub-set Short-form
Performance management PM
Fault and maintenance management FMM
Configuration management CM
Accounting management AM
Security management SM
As Black Box Network Services does not support accounting management AM is not in the monitor's
main menu.
At any time, the
<H> (“Help”) command shows and explains the available commands and their
parameters.
The prompt on the screen consists of:

a master/slave or repeater (CO - central office, CP - customer premise, RR - repeater) indication

the slot-number <SN> indication or the repeater address indication

the short form of the specified sub-set menu.
For example:
“CO_04_FMM>”.
“RR_04_FMM>”.
Note: Repeater address is calculated as repeater position (starting from CO side) in the xDSL chain
plus 2. Thus the repeater nearest to CO side has address 03, second one
– 04, etc.
7.2.1 CLI Timeout
If the CLI interface receives no valid character during 5 minutes, the unit will close the active
session.