TELCOLINK DT - AccessDSL NTU
User
Manual
Version: 2.5
Page 43 of 66
7.2.10.18
AUTOLOOP Command
SYNTAX: AUTOLOOP [ON/OFF] or AUL [ON/OFF]
This command enables/disables the usage of lines 140/141 for The automatic V.54 loop control.
7.2.10.19
SLOTUSAGE Command
SYNTAX: SLOTUSAGE [ON/OFF] or SU [ON/OFF]
This command enables/disables the usage of timeslot 0 for the Nx64 payload when service Nx64
only is selected.
7.2.10.20
MODE Command
SYNTAX: MODE [N/D/M] or MO [N/D/M]
This command sets the operation mode.
Parameters:
N
Normal mode
D
Dual pair mode
M
Multipoint mode
7.2.10.21
MASTER Command
SYNTAX: MASTER [ON/OFF] or MA [ON/OFF]
Set xDSL master/slave mode. One unit must be configured as master, the other as slave.
7.2.10.22
PLL Command
SYNTAX: PLL [ON/OFF
This command enables/disables the PLL on channel A of xDSL port (see section 3.2.7).
7.2.10.23
RS232SLOT Command
SYNTAX: RS232SLOT [n] or RSS [n]
This command assigns the slot [1..31] for RS232 data transmission.
7.2.10.24
RS232BITS Command
SYNTAX: RS232BITS [n] or RSB [n]
This command sets the number the RS232 data bits [7..10].
Содержание DESKTOP TELCO
Страница 7: ...TELCOLINK DT AccessDSL NTU User Manual Version 2 5 Page 7 of 66...
Страница 22: ......