11
CHAPTER 1: HEADLINE
1.877.877.2269
BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
CHAPTER 4: PANEL BUTTON CONTROL
4.1 I/O CONNECTION SWITCHING
The front panel features eight input selection buttons and eight output selection buttons for switching the I/O connection.
1. To convert one input to an output:
Example: Input 1 to Output 3
—> Press INPUTS 1 + OUTPUTS 3
2. To convert an input to several outputs:
Example: Convert Input 2 to Output 3 and 4
—> Press INPUTS 2 + OUTPUTS 3 + OUTPUTS 4
NOTE: Indicators for the pressed buttons will blink green for three times if the conversion is done, then it will be off. If the conversion
failed, they will be off immediately.
4.2 EDID CONFIGURATION
The rear panel has a 4-pin EDID DIP switcher to manage EDID. The EDID data and its corresponding DIP switcher status are shown in the
next table.
TABLE 4-1. EDID DATA
DIP SWITCH
NUMBER STATUS
EDID
ON
On
Off
EDID
DIP
1
1
1
0
2 3 4
2 3 4
0
0000
Passthrough (default)
1
0001
720p 2D passthrough CHo
2
0010
720p 3D passthrough CH
3
0011
1080p 2D passthrough CH
4
0100
1080p 3D passthrough CH
5
0101
4K @ 30 Hz passthrough CH
6
0010
4K @ 30 Hz 2.0 CH
7
0111
4K @ 30 Hz 7.1 CH
8
1000
4K @ 60 Hz 4:2:0 passthrough CH
9
1001
4K @ 60 Hz 4:2:0 7.1 CH
10
1010
4K @ 60 Hz 4:4:4 passthrough CH
11
1011
4K @ 60 Hz 4:4:4 7.1 CH
–
1111
Enable Software EDID management mode: RS-232
control or Web-based GUI control
4.3 I/O CONNECTION INQUIRY
Press OUTPUT button 1, 2, 3, 4, 5, 6, 7 or 8 to inquiry its corresponding input, and then the indicator of the input button will turn green.
