manualshive.com logo in svg

Black Box AVS-5DA1-HDB, Руководство пользователя, Страница: 28 / 52

Поделиться
Скачать
Black Box AVS-5DA1-HDB Скачать руководство пользователя страница 28

Page 28

724-746-5500   |   blackbox.com

 

Chapter 4: Operation

Table 4-1. CEC and Standby.

Situation

Working Status

CEC: on, Standby: on Press the STANDBY button on the IR remote, and AVSC-

5DA1-HDB enters standby mode, along with all HDMI 
source devices.

Press the STANDBY button again on the IR remote, and 
the AVSC-5DA1-HDB exits standby mode and the HDMI 
source devices start working.

CEC: on, Standby: off Press the STANDBY button on the IR remote, and the 

AVSC-5DA1-HDB enters standby mode and HDMI 1–3 
source devices remain on. 

CEC: on

Use CEC function buttons, up-arrow, down-arrow, left-
arrow, right-arrow, and OK buttons on the IR remote to 
control HDMI source devices. Menu buttons include play, 
pause, fast forward, fast reverse, and operations. 

CEC: off

When CEC is set to off, you cannot control HDMI source 
devices through the IR remote.

IR receiver

IR remote

DVD (signal source)

DVD (signal source)

DVD (signal source)

 

Figure 4-5. CEC: Control HDMI source devices using the AVSC-5DA1-HDB’s IR remote.

Содержание AVS-5DA1-HDB





















































Отзывы:

Нет отзывов