
Page 17
724-746-5500 | blackbox.com
Chapter 3: System Connection
3. System Connection
3.1 Usage Precautions
1. Install the system in a clean environment that has a proper temperature and humidity.
2. Make sure that all the power switches, plugs, sockets, and power cords are insulated
and safe.
3. Connect all devices before powering on.
3.2 System Diagram
IR emitter
IR receiver
IR receiver
RS-232
control panel
AVS-HDB-RX
Projector
HDTV
PC
Laptop
PC
DV camera
DVD
Mic
Figure 3-1. Typical application.
3.3 Connection Procedure
Step 1. Connect HDMI source devices (e.g. Blu-ray
™
DVD) to the Scaler's HDMI input
ports with HDMI cable. Connect VGA source devices (e.g. PC) to the Scaler’s
VGA input ports with VGA cable.
Step 2. Connect audio sources to the corresponding AUDIO INPUT ports on the AVSC-
5DA1-HDB with audio cable. The HDMI audio can be embedded or external by
sending the right command.
Step 3. Connect an HDMI display device to the HDMI output port of AVSC-5DA1-HDB
with HDMI cable.