Chapter 5: Operation
724-746-5500 | blackbox.com
Page 37
5.3.2 The Dashboard
The Dashboard provides a quick overview of link quality as well as confirmation of the current link rate mode and the firmware
revisions of both the transmitter and receiver units.
5.3.2.1 To display the Dashboard
• As discussed in more detail left, press
three times and then press . The Dashboard will be shown at the top of the con-
nected video display:
• To remove the Dashboard, press
three times and then press .
The Dashboard will also disappear if you select any of the other hotkeys.
Signal quality indicators for each of the
four wire-pairs within the main link cable.
Depending on the number of signal errors that
are being detected, each of the four bars will
increase in length and show a different color:
Current link rate
mode
Displays either HR for
High Rate mode or LR
for Low Rate mode. If
the link is not operat-
ing, the entry will
show
- -
Transmitter and receiver firmware
Displays the current firmware revisions in
both units. If the link between units is not
currently valid, the TX entry will show
-.--
Best quality.
Very few errors
Worst quality.
Many data errors
