Wizard DP Extender
724-746-5500 | blackbox.com
Page 26
3.2.9 Receiver audio connections
The Wizard DP Extender units support analog and digital audio. Line in and line out connectors are provided on both the trans-
mitter and receiver units. Additionally, the receiver has dedicated headphone and microphone jacks on its front panel.
On the receiver, the analog portion of the Line Out
socket on the rear panel and the headphone socket on the front panel
are joined and both provide the same output (but have different electrical properties). For the Microphone socket on the front
panel and the Line In
socket on the rear, you can choose between the two inputs using a hotkey switch (see below for
details).
2 If a microphone is required, connect the 3.5mm jack from your microphone to the socket on the front panel of the receiver
unit.
3 Ensure that the microphone input is selected using the hotkey switch: Once the Wizard DP Extender receiver is powered on,
use a USB keyboard attached to one of the A ports and press the
key
three times
in succession. Then press the
3
key
(not from the numeric keypad), to select
Microphone
mode. The
icon will be displayed on screen to confirm your selec-
tion.
3.2.9.1 To connect headphones and/or a microphone
1 Connect the 3.5mm jack from your headphones to the
socket on the front panel of the receiver unit.
From your
headphones
or speakers
From your
microphone
