35
CHAPTER 4: Configuration
•
Set RS-232 data format
(see
Sections 4.3
and
5.11
):
[S] [1] [Enter]
= 1 stop bit (default)
[S] [2] [Enter]
= 2 stop bits
[S] [3] [Enter]
= No parity (default)
[S] [4] [Enter]
= Even parity
[S] [5] [Enter]
= Odd parity
[S] [7] [Enter]
= 7 data bits (default)
[S] [8] [Enter]
= 8 data bits
•
Enable/disable mouse switching
(see
Section 5.8
):
[M] [1] [Enter]
= Switching between CPUs with a 3-button mouse or
IntelliMouse is
not
supported (default)
[M] [2] [Enter]
= You
can
switch between CPUs with a 3-button mouse or
IntelliMouse
•
Restore mouse
(see
Section 5.9
):
[M] [6] [Enter]
= Restore regular mouse
[M] [7] [Enter]
= Restore IntelliMouse
•
Set/clear password
(see
Section 4.4
):
[P] [Enter]
(password)
[Enter]
= Sets the Extender’s password
[P] [Enter] [Enter]
= Clears the Extender’s password
•
[F] [1] [Enter]
=
Display firmware version
(see
Section 6.3
)
•
[F] [8] [Enter]
=
Reset to factory defaults
(see
Section 4.5
)
When you finish entering configuration commands and/or adjusting the
Extender’s video compensation (see
Section 4.2.2.A
), press [Enter] to quit
configuration mode and return to normal operation. The Num Lock, Caps Lock,
and Scroll Lock LEDs on your keyboard will stop flashing and will return to the
states they were in before.
