Black Box AC1059A, Руководство пользователя

Страница: 28 / 70

25
Figure 4-6. Configure RVS for Terminal Emulation screen using custom settings.
The Host Connection setting drop-down menu (options are either Serial Port 1 or Serial Port 2) can be seen in
Figure 4-6. From this menu, choose the serial port that you want to use for the host connection. You can set the
baud rate, data bits, parity, stop bits, and flow control settings for this port via the drop-down menus in Figure
4-6. Press
Next .
When using a network connection, you must install the RealPort driver software on the host PC or server. This
will create a virtual COM port for each serial port on your Remote Video System IP (these are the traditional
RealPort COM ports) as well as one additional virtual COM port that can be used for the terminal emulator
connection. The host application must be configured to use this additional virtual COM port.
CHAPTER 4: Configuring Devices