English
-7-
Before First Use
Note:
This appliance is fitted with a battery,
so the LCD panel will show the Rice Cooker
icon and the time, even when it is not
connected to an electrical supply.
Note:
Should the power supply fail during
cooking, the product will stop working. If
the power supply reconnects within 1 hour,
the internal battery will allow the appliance
to continue to operate from where it
stopped.
Setting the Clock
To set the clock, first connect the appliance
to a suitable electrical supply. Press & hold
the “Minute” button (19) until a beep is
heard. The background will become green
& the current time will flash. Each press of
the “Minute” button will advance the time
by one minute. Holding the button down
will advance the time more quickly.
Each press of the “Hour” button (17) will
advance the time by one hour. Holding the
button down will advance the time more
quickly. Pressing the "Keep Warm / Cancel"
button ( 14 ) will set the time.
Use
To Cook Rice
Place the appliance on a flat, even surface.
Open the lid (1) by pressing the lid release
button (3). Using the measuring cup (12)
provided, add the required amount of rice
to the cooking bowl (8) then add the
required amount of water. Check that the
outside of the bowl is dry then place it into
the appliance, rotating the bowl to ensure
correct contact with the cooking plate.
Close the lid.
Fit the cord set (28) into the appliance inlet
(29) & connect the appliance to a suitable
electrical supply.
The Rice Cooker will enter “Stand By”
mode, and the LCD display (4) will show a
green background for approximately 30
seconds. A yellow lamp in the Start /
Reheat Button (15) will flash until a cooking
mode is selected.
Press the Function Button (13) once. A
small arrow in the LCD Display will indicate
that “Rice” is the selected cooking mode
(21).
Press the Start / Reheat Button (15). The
yellow lamp in the button will now stay lit
during cooking.
After the first stage of cooking is completed,
the appliance will enter "Simmer" mode.
The display will count up to the default
simmering time of 10 minutes.
When the rice is cooked, the appliance will
emit a series of beeps.
The appliance has entered the “Keep
Warm” mode when the Start / Reheat
button lamp goes out, and the yellow lamp
in the “Keep Warm / Cancel” button lights
up. The background of the LCD will also
change to orange.
If a smaller quantity of rice is to be cooked
(less than 2 cups), a special “Small Volume
Rice” mode is available.
This is similar to cooking larger amounts of
rice, but is selected by pressing the
Function Button (13) twice. The small arrow
in the LCD Display will indicate that “Small
Volume Rice” is the selected cooking mode
(20).
Press the Start / Reheat Button (15). The
yellow lamp in the button will stay lit during
cooking.
After the first stage of cooking is completed,
the appliance will enter “Simmer” mode.
The display will count up to the default
simmering time of 7 minutes.
When the rice is cooked, the appliance will
emit a series of beeps. The appliance has
entered the “Keep Warm” mode when the
Start / Reheat button lamp goes out, and
the yellow lamp in the “Keep Warm /
Cancel” button lights up. The background
of the LCD will also change to orange.
Once any cooking mode is completed,
disconnect the appliance from the electrical
supply before opening & serving.
To Cook Soaked Rice:
Place the appliance on a flat, even surface.
Open the lid (1) by pressing the lid release
button (3). Add the required ingredients &
water to the cooking bowl (8).
